High noon in January at a solar farm in the southern summer. The sun beats down on rows of panels that run out of sight, the wind pushes on every row as if it were a sail, and a storm building on the horizon may bring hail. Nobody who signed off on the project is there to see it, but the structure will take all of it, every day, for twenty-five years. That is why it is so striking that the panel gets chosen with a magnifying glass and the racking, too often, on price.
At Indumor we fabricate fixed mounting structures for ground and industrial roofs, in hot-dip galvanized steel. We work as a supplier to installers: you design the farm or the system, we fabricate the racking in series, with deliveries that keep pace with your construction schedule.
Quote a structureDriven piles or concrete footings, with the optimal tilt for the site's latitude. This is the racking for solar farms and rural water pumping: there is land, orientation is free, and capacity grows by adding rows.
It adapts to the existing roof sheeting and spreads the load over the purlins. It uses a surface that is already built and puts the power right above where it is consumed. If the roof has no reserve capacity for the load, we also handle the reinforcement.
Verdict: if you have a sound industrial roof and the load is underneath it, start with the roof; if you need more capacity than the roof can give, or the roof cannot carry it, go to the ground. And if the project calls for something else, we also build custom solutions.
For an installer, what matters most is not the price per pound: it is that the structure arrives complete, in the order it gets assembled, with no parts that need fixing in the field. A crew standing around waiting for one member costs a lot more than the member.
Hot-dip galvanizing
It coats the entire part, edges and holes included, and it is the finish that keeps pace with the service life of the panel.
Repeatable CNC cutting
Cold-formed sections and laser-cut gussets: part one thousand is identical to the first, and the holes land where they should.
Labeled kits
Every part leaves the shop labeled and kits are packed by sector of the site, so the crew does not waste time searching.
Bolted assembly
On site everything gets bolted, with no welding and no drilling. That is designed in from the drawing.
In the shop we deal with it before the part ever reaches the site: every cut and every hole is made before galvanizing, never after, and the part leaves ready to bolt. Never weld a galvanized structure in the field: the heat burns off the zinc right at the joint and leaves bare steel at the most stressed point.
Send us the engineering and we will quote the structure in series, galvanized and labeled. Or email tecnica@indumor.com.
© Indumor 2010–2026 — Industrial steel fabrication, Córdoba, Argentina
